Page 1 of 3
MU 13e BERGFALKE 1 QUARTER SCALE**
Posted: 10 Oct 2021, 10:01
by chris williams
This plan was first published in FSM back at the turn of the century. Some years later, I updated it and built a new version, using the old plan on which to build it. This is the chronicle of the later build for anyone interested in building one...
Note: the fuselage is constructed on a jig: the pics show it after it has been removed...
Re: MU 13e BERGFALKE 1 QUARTER SCALE
Posted: 11 Oct 2021, 09:55
by chris williams
Re: MU 13e BERGFALKE 1 QUARTER SCALE
Posted: 13 Oct 2021, 20:41
by chris williams
The ply fuselage sheeting was reduced from the 1.5mm of the original to .8mm. In retrospect, the lightening holes were pretty much a waste of time...!
Re: MU 13e BERGFALKE 1 QUARTER SCALE
Posted: 15 Oct 2021, 10:21
by chris williams
Half-round Ramin strip seems to be gone from the shelves these days: apparently Ramin has become one of the endangered species...
Re: MU 13e BERGFALKE 1 QUARTER SCALE
Posted: 15 Oct 2021, 10:37
by Adam C
Lovely, thanks Chris.
From the photos it looks like the wing joiner box sits flush to the former but the plans show it angled back .
Re: MU 13e BERGFALKE 1 QUARTER SCALE
Posted: 16 Oct 2021, 09:59
by chris williams
No way I can remember what I did back then, Adam...! Just set the joiner box in such a way as to achieve the correct angle.
Re: MU 13e BERGFALKE 1 QUARTER SCALE
Posted: 16 Oct 2021, 10:01
by chris williams
Compared to some the older vintage gliders, the canopy on this one is relatively straightforward...
Re: MU 13e BERGFALKE 1 QUARTER SCALE**
Posted: 16 Oct 2021, 13:07
by Phill Tadman
Lovely!
Re: MU 13e BERGFALKE 1 QUARTER SCALE
Posted: 16 Oct 2021, 16:58
by Barry_Cole
A canopy so simple, even I can make one.!!!
Re: MU 13e BERGFALKE 1 QUARTER SCALE
Posted: 17 Oct 2021, 10:00
by chris williams