-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Ka6E build**
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: Ka6E built
Some answers on the previous posts
Glassing a compound curved fuselage is no problem if you use a low density glass fabric. For this type of job I use 18gr/m2
Using a roller as shown on previous pictures makes the job very easy. Just lay the glass on the fuse dry and spread by hand over the fuse
Then roll in the resin. Do not apply to much resin. If a glass job is done properly you will just see the weave of the fabric and that will be filled by the primer filler. The rollers are the cheapest one can get because cleaning is not economic.
For painting I use spray cans of Automotive paint. I do not have spray gear that you have to clean for half a day after use. Two packs are expensive.
With ready available spray cans you have a big choice of colors. Also I can get at the automotive outlet where I buy the cans have colors custom made in spray cans (at a price) I use an automotive filler/primer spray first and sand that as smooth as possible before applying the final coat(s)
Glassing a compound curved fuselage is no problem if you use a low density glass fabric. For this type of job I use 18gr/m2
Using a roller as shown on previous pictures makes the job very easy. Just lay the glass on the fuse dry and spread by hand over the fuse
Then roll in the resin. Do not apply to much resin. If a glass job is done properly you will just see the weave of the fabric and that will be filled by the primer filler. The rollers are the cheapest one can get because cleaning is not economic.
For painting I use spray cans of Automotive paint. I do not have spray gear that you have to clean for half a day after use. Two packs are expensive.
With ready available spray cans you have a big choice of colors. Also I can get at the automotive outlet where I buy the cans have colors custom made in spray cans (at a price) I use an automotive filler/primer spray first and sand that as smooth as possible before applying the final coat(s)
-
- Posts: 41
- Joined: 19 Mar 2015, 02:36
- Location: Wilts
Re: Ka6E built
Jilles,
Thanks for your answers.. Always appreciate tips from the pro's!
Jus
Thanks for your answers.. Always appreciate tips from the pro's!
Jus
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: Ka6E built
I have one spare canopy here in Brisbane and I am told the new Zealand source will do an other run to get spares for would be builders in our region
Australia post is very heavy handed in the fees to make sending canopies to Europe economical. the other way around is half the cost I hear. As Cliff mentioned they are available in the UK
Cheers
Jilles
Australia post is very heavy handed in the fees to make sending canopies to Europe economical. the other way around is half the cost I hear. As Cliff mentioned they are available in the UK
Cheers
Jilles
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: Ka6E build
After lots of sanding finally dared to do the paint job.
The fuse is done now including tailbits and canopy.
A member friend in my model club has a NC cutter for stick-on logo's. I used the Alexander Schleicher Logo and included the KA6E model type in the design
next project, painting the wings
The fuse is done now including tailbits and canopy.
A member friend in my model club has a NC cutter for stick-on logo's. I used the Alexander Schleicher Logo and included the KA6E model type in the design
next project, painting the wings
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: Ka6E build
Got it all completed today. only need to do the balancing act. At the moment it weighs in at 7.7 kg. I hope not to exceed the 8kg mark.
At scale 1:3 it should be fine
The COG is not far from what it should be so there is hope.
At scale 1:3 it should be fine
The COG is not far from what it should be so there is hope.
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Ka6E build
Very nice indeed Jilles.
Well done.
Peter
Well done.
Peter
Re: Ka6E build
That looks splendid Jilles. Yet another model to add to my build list.
Brian.
Brian.
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: Ka6E build
Got finally to balance the Ka6E. During the built the nose in front of former F1 was already 90% solid lead
Only required 200 gr lead to get the C.O.G at 100mm from the LE. It may be a bit forward but this I always do for a maiden
The C.O.G was located by means of the graphical way as suggested in the Book of model Aerodynamic of Martin Simons
For those that are building the Ka6E of my plans a breakdown of the weight is included
The target of maximum 8kg flying weight was met.
Only required 200 gr lead to get the C.O.G at 100mm from the LE. It may be a bit forward but this I always do for a maiden
The C.O.G was located by means of the graphical way as suggested in the Book of model Aerodynamic of Martin Simons
For those that are building the Ka6E of my plans a breakdown of the weight is included
The target of maximum 8kg flying weight was met.
- Noël Rumers
- Posts: 220
- Joined: 20 Mar 2015, 10:29
- Location: Hoboken Antwerp
Re: Ka6E build
Looks great!!!
Noël
Noël