Scale Soaring UK

The forum for all your modelling requirements relating to scale gliders
https://scalesoaring.co.uk/phpBB3/

BJ-1 DUSTER**

https://scalesoaring.co.uk/phpBB3/viewtopic.php?t=865

Page 1 of 4

BJ-1 DUSTER**

Posted: 02 Apr 2016, 16:43
by chris williams
02.JPG
03.JPG
04.JPG
05.JPG
01.JPG
A short thread for the 5th scale version of my Duster plan...

Re: BJ-1 DUSTER

Posted: 02 Apr 2016, 18:54
by DG1000
Chris,

Thank you for putting these photos on here, will keep my build thread up to date.

Geoff

Re: BJ-1 DUSTER

Posted: 03 Apr 2016, 07:58
by chris williams
Here are all the parts...as usual, check the print-out against the plan...

Re: BJ-1 DUSTER

Posted: 03 Apr 2016, 16:37
by DG1000
Chris,

Again many thanks for making these available.

Geoff

Re: BJ-1 DUSTER

Posted: 06 Apr 2016, 12:14
by chris williams
04280009.JPG
04280010.JPG
04280011.JPG
05010002.JPG
Continuing...

Re: BJ-1 DUSTER

Posted: 07 Apr 2016, 22:05
by chris williams
05010001.JPG
05020002.JPG
05020003.JPG
05020004.JPG
Finishing off the tail and starting on the wings...

Re: BJ-1 DUSTER

Posted: 10 Apr 2016, 08:24
by chris williams
05030001.JPG
05030003.JPG
05030004.JPG
05030002.JPG
The top sheeting will be added after the wing centre section is laid on to the wing support jigs

Re: BJ-1 DUSTER

Posted: 13 Apr 2016, 15:17
by chris williams
05030006.JPG
05050001.JPG
05060001.JPG
05070001.JPG
05070003.JPG
Now for the outer wing panels...

Re: BJ-1 DUSTER

Posted: 16 Apr 2016, 00:02
by chris williams
11270001 copy.jpg
12020001.JPG
12020002.JPG
More on the outer wing panels...

Re: BJ-1 DUSTER

Posted: 19 Apr 2016, 09:50
by chris williams
12030001.JPG
12040001.JPG
12190004.JPG
Sorting the TE brakes and wing tip... I made up the up-turned tips of the full-size, but in comparison to Smallpiece's conventional tips, there seems to be a slight reduction in beneficial stall characteristics, so one up to the Wookie
All times are UTC+01:00
Page 1 of 4

Powered by phpBB® Forum Software © phpBB Limited