Page 1 of 1
BJ-1 DUSTER**
Posted: 02 Apr 2016, 16:43
by chris williams
A short thread for the 5th scale version of my Duster plan...
Re: BJ-1 DUSTER
Posted: 02 Apr 2016, 18:54
by DG1000
Chris,
Thank you for putting these photos on here, will keep my build thread up to date.
Geoff
Re: BJ-1 DUSTER
Posted: 03 Apr 2016, 07:58
by chris williams
Here are all the parts...as usual, check the print-out against the plan...
Re: BJ-1 DUSTER
Posted: 03 Apr 2016, 16:37
by DG1000
Chris,
Again many thanks for making these available.
Geoff
Re: BJ-1 DUSTER
Posted: 06 Apr 2016, 12:14
by chris williams
Re: BJ-1 DUSTER
Posted: 07 Apr 2016, 22:05
by chris williams
Finishing off the tail and starting on the wings...
Re: BJ-1 DUSTER
Posted: 10 Apr 2016, 08:24
by chris williams
The top sheeting will be added after the wing centre section is laid on to the wing support jigs
Re: BJ-1 DUSTER
Posted: 13 Apr 2016, 15:17
by chris williams
Now for the outer wing panels...
Re: BJ-1 DUSTER
Posted: 16 Apr 2016, 00:02
by chris williams
More on the outer wing panels...
Re: BJ-1 DUSTER
Posted: 19 Apr 2016, 09:50
by chris williams
Sorting the TE brakes and wing tip... I made up the up-turned tips of the full-size, but in comparison to Smallpiece's conventional tips, there seems to be a slight reduction in beneficial stall characteristics, so one up to the Wookie
Re: BJ-1 DUSTER
Posted: 19 Apr 2016, 15:43
by Barry_Cole
Re: BJ-1 DUSTER
Posted: 19 Apr 2016, 19:33
by Tonyh
Hold on Barry hasn`t built 2 models in the past year, Has he!!
Re: BJ-1 DUSTER
Posted: 20 Apr 2016, 19:47
by DG1000
Chris,
Many thanks for all the other BJ-1 build photo's.
Geoff
Re: BJ-1 DUSTER
Posted: 20 Apr 2016, 20:05
by Barry_Cole
Tonyh wrote:Hold on Barry hasn`t built 2 models in the past year, Has he!!
At least.....
BC
Re: BJ-1 DUSTER
Posted: 21 Apr 2016, 08:16
by john greenfield
Barry_Cole wrote:Tonyh wrote:Hold on Barry hasn`t built 2 models in the past year, Has he!!
At least.....
BC
Could not even finish the sentence ...let alone a model !!!
Re: BJ-1 DUSTER
Posted: 22 Apr 2016, 12:53
by chris williams
A quick look at the motor/cowl arrangement and the top removable decking
Re: BJ-1 DUSTER
Posted: 27 Apr 2016, 23:35
by chris williams
More views of the cowl, tailplane, and TE airbrake set up...
Re: BJ-1 DUSTER
Posted: 03 May 2016, 19:15
by chris williams
Some more detail pics. The aileron gaps are sealed with thin Mylar strips
Re: BJ-1 DUSTER
Posted: 06 May 2016, 09:25
by chris williams
More finished model detail...
Re: BJ-1 DUSTER
Posted: 21 Mar 2020, 21:18
by andynrose315
evening all. i’m looking for a build to do over the next few weeks (!). i would love to go for the petrel )3.4) but my building area is too small. just wondering what options there might be and considering the duster. googling did not turn up much so wondering what the experience of this glider is.
Re: BJ-1 DUSTER
Posted: 22 Mar 2020, 10:01
by chris williams
If you're short of space, then the 7th scale Wolf might be the answer...?
Re: BJ-1 DUSTER
Posted: 29 Mar 2020, 10:11
by andynrose315
Chris, thanks. Thats a good thought. Im am also just looking in to making that little bit extra room for a Petrel.....
Re: BJ-1 DUSTER
Posted: 14 Apr 2020, 20:29
by Mark Hemsley
Hi all
I've just purchased the the plans and short kit. Looking at the plans, am I right in thinking that the coupling between the centre wing section to the outer wings is friction based using piano wire and brass tubing?
Regards
Mark
Re: BJ-1 DUSTER
Posted: 15 Apr 2020, 08:12
by Cliff Evans
What most would do is put the wing together and then a strip of tape over the joint. There are so many different methods for holding wings together. I am sure that members will offer their own views on this subject.
Re: BJ-1 DUSTER
Posted: 15 Apr 2020, 09:38
by chris williams
Yes, at this scale, tape is the ideal solution. However, when I did the same thing on the 3.5 scale version, the tape was too strong, and catching an obstacle on its first landing, the centre section was written off as there was no give in the system. This goes to show that the principle of flexibility in a wing retention system is important!
Re: BJ-1 DUSTER
Posted: 15 Apr 2020, 13:30
by Mark Hemsley
Thanks all
Re: BJ-1 DUSTER
Posted: 15 Apr 2020, 15:25
by chris williams
Mark, let me have your email,address and I'll send you all the construction pics
Re: BJ-1 DUSTER
Posted: 15 Apr 2020, 16:09
by Barry_Cole
Re: BJ-1 DUSTER
Posted: 15 Apr 2020, 17:00
by chris williams
It's the thought that counts...
Re: BJ-1 DUSTER
Posted: 15 Apr 2020, 19:20
by Barry_Cole
Re: BJ-1 DUSTER**
Posted: 24 Oct 2020, 12:59
by robert-woolley
chris williams wrote: ↑03 Apr 2016, 07:58
Here are all the parts...as usual, check the print-out against the plan...
I have just purchased the 1/5th Scale plan from Sarik and printed off one of the larger PDF templates and it is spot on to the printed plan. So thank you for providing these. As this will be only my second plan build / and first glider build, I am still studying the plan and build review from QEFI magazine that Sarik included before making a start.