• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

more channels needed

Discussion about Tx, Rx, Servo's, Batteries, Chargers, and all the other things we like to talk about..
Moderator: VinceC
mick a

more channels needed

Post by mick a »

hi
i have a hitec 9 chanel and might need some more channels .i.e. dual elevator separate ailerons etc
can i fit some sort of power box system to hitec receivers ?
cant use two receivers as system won’t allow it gives weaker signal to both
any ideas any one ?
Barry_Cole

Re: more channels needed

Post by Barry_Cole »

Cliff Evans wrote: 11 Aug 2018, 22:53Frsky!
16 or 32 if you really need them. It's the way to go.
Ken Kaye

Re: more channels needed

Post by Ken Kaye »

Take a look at Smart Fly Equalizers. Similar to a JR Matchbox. They can be used for one channel to drive multiple servos. For example, instead of using two separate channels for the spoilers a single spoiler channel goes to the Equalizer which in turn drives each spoiler servo. Each output from the Equalizer has servo reverse, center and end point adjustments available. I have used quite a few of them and they work well.
Post Reply