This is my first "proper" build, so I thought I'd have a go with magnets.
First, an MDF 16 mm board 2 metres x 600 mm.
Then covered it with a piece of 0.06 mm zincalume.
I ordered my magnet set from Airfield Models.
Next I have to varnish the wooden parts of the set and assemble them.
That's for tomorrow.
1 Magnetic fixture system II set, large, Birch and plywood. US$275.00
Shipping US$86.40
Total US$361.40
Total A$533.16
Payment by Western Union A$50.00
Total A$583.16
Total British Pounds £325.95
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Building with magnets.
- Max Wright
- Posts: 198
- Joined: 10 Mar 2020, 19:57
- Location: Clayton Bay South Australia
- Max Wright
- Posts: 198
- Joined: 10 Mar 2020, 19:57
- Location: Clayton Bay South Australia
Re: Building with magnets.
So, here they are assembled to check that everything is there . . .
There is only one problem with them - they are too wide to fit between the ribs on the Falke.
I'm guessing that I will have to unbolt the magnets and use them on their own.
There is only one problem with them - they are too wide to fit between the ribs on the Falke.
I'm guessing that I will have to unbolt the magnets and use them on their own.
Max