Re: Information and advice
Posted: 18 Feb 2016, 16:41
John, Barry doesn't have time to listen to your advice because hes so busy giving it out 
Ter
Ter
BC
Scale Soaring UK
The forum for all your modelling requirements relating to scale gliders
https://scalesoaring.co.uk/phpBB3/
Information and advice
Page 2 of 2
Re: Information and advice
Posted: 18 Feb 2016, 19:59
My ears are burning, what goes on.........
BC
BC
Re: Information and advice
Posted: 16 Jul 2019, 02:07
Hi John
I just joined last week and already very excited to get going on a project.
I am buying a Minimoa short kit from cliff and will be my first large model and I know I will need some advise and help. I have built regular homebuilt and help to restore classic and antique aircraft over the last 50 or so years.
I am retired from flying airline and business aircraft and looking forward to building some models .(too old to fly now 77). I have been active in the Rc world for the last 3 years and before that started in the mid fifties with u control but had too many other things going on, wife,kids,job,etc.
I will odrer my short kit later this week.
Where is the best sorce of supply for birch ply? I know I will be needing some. (a lot)
Look forward to getting started.
Cheers
Charles
Fremont Ca
I just joined last week and already very excited to get going on a project.
I am buying a Minimoa short kit from cliff and will be my first large model and I know I will need some advise and help. I have built regular homebuilt and help to restore classic and antique aircraft over the last 50 or so years.
I am retired from flying airline and business aircraft and looking forward to building some models .(too old to fly now 77). I have been active in the Rc world for the last 3 years and before that started in the mid fifties with u control but had too many other things going on, wife,kids,job,etc.
I will odrer my short kit later this week.
Where is the best sorce of supply for birch ply? I know I will be needing some. (a lot)
Look forward to getting started.
Cheers
Charles
Fremont Ca
Re: Information and advice
Posted: 16 Jul 2019, 09:15
GCHQ is listening, beware........
BC
BC
Re: Information and advice
Posted: 16 Jul 2019, 09:33
We have some good suppliers here in the UK, but it would be quite costly to get it over to your neck of the woods?
Re: Information and advice
Posted: 30 Jul 2019, 17:15
Hi Charles,
Re: Birch Ply...
As you are in Ca I suggest you contact 'Aircraft Spruce and Specialty'.
Aircraft Spruce WEST
225 Airport Circle
Corona, CA 92880
I have used them for full size and large model timber and they are very helpful.
May be rather expensive for model use though, as all wood is certificated
Re: Birch Ply...
As you are in Ca I suggest you contact 'Aircraft Spruce and Specialty'.
Aircraft Spruce WEST
225 Airport Circle
Corona, CA 92880
I have used them for full size and large model timber and they are very helpful.
May be rather expensive for model use though, as all wood is certificated