Anyone wishing to register, once you have, PLEASE CHECK YOUR SPAM FOLDER for the confirmation email. {And please, if possible can you use your real names! there are far too many numbers and silly titles being used}

New dash

All non-scale topis should go in here for discussion.
Post Reply
User avatar
Cliff Evans
Posts: 1700
Joined: 13 Mar 2015, 10:32
Location: Bristol
Contact:

New dash

Post by Cliff Evans » 01 May 2018, 13:47

Working on dash panel for a friends Mosquito.
Attachments
20180501_134354.jpg
20180501_134403.jpg

Tonyh
Posts: 61
Joined: 20 Mar 2015, 19:19

Re: New dash

Post by Tonyh » 01 May 2018, 18:56

Very nice, What scale is the Mossie as looking for 2 Canopies 1/5 scale.
Tony.

User avatar
Cliff Evans
Posts: 1700
Joined: 13 Mar 2015, 10:32
Location: Bristol
Contact:

Re: New dash

Post by Cliff Evans » 01 May 2018, 19:17

this one is 1/6 scale try Mick Reeves or Brian Taylor.

User avatar
Peter Balcombe
Posts: 903
Joined: 18 Mar 2015, 10:13
Location: Clevedon, North Somerset, U.K.

Re: New dash

Post by Peter Balcombe » 01 May 2018, 19:29

Richard Rawle does a 1/5 scale Mossie canopy.
Look up Richard Rawle models.
The Mick Reeves & Brian Taylor models seem to be at different scales.
Peter

Tonyh
Posts: 61
Joined: 20 Mar 2015, 19:19

Re: New dash

Post by Tonyh » 02 May 2018, 20:10

Yes I spoke to Richard a while ago and he couldn`t remember who had the plug for the canopy.I`m thinking that I might be able to get a plug 3d printed and then finish it to a good surface to have one pulled.
Tony

User avatar
Cliff Evans
Posts: 1700
Joined: 13 Mar 2015, 10:32
Location: Bristol
Contact:

Re: New dash

Post by Cliff Evans » 02 May 2018, 20:46

3d printed would warp badly under the heat. Give Barry at Sarik Hobbies a shout, he may have one!

Post Reply