• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

Cranked prop hub supplier?

Here is where you can discuss to your hearts content the merits of sustainers.
Jolly Roger
Posts: 573
Joined: 30 May 2015, 20:35
Location: Sutton Bank, North Yorkshire

Cranked prop hub supplier?

Post by Jolly Roger »

Does anyone know where you can get these from? The offset enables the blade to sits much closer to the fuselage when not in use. I know the F5J folks use them but I need one to take a larger motor shaft of 8mm.

Thanks,
Rog
B Sharp

Re: Cranked prop hub supplier?

Post by B Sharp »

Hi Rog. Try Hyperflight.
Brian. :)
Jolly Roger
Posts: 573
Joined: 30 May 2015, 20:35
Location: Sutton Bank, North Yorkshire

Re: Cranked prop hub supplier?

Post by Jolly Roger »

Thanks Brian yes they were my first thought...but sadly they have none for 8mm shafts.
Phill Tadman
Posts: 329
Joined: 18 Aug 2015, 20:38
Location: South Cambs

Re: Cranked prop hub supplier?

Post by Phill Tadman »

Hacker have these in various sizes

https://www.hacker-motor-shop.com/Acces ... 200&p=4737

Phill
Jolly Roger
Posts: 573
Joined: 30 May 2015, 20:35
Location: Sutton Bank, North Yorkshire

Re: Cranked prop hub supplier?

Post by Jolly Roger »

Phil - this looks PERFECT! I am so grateful. Will order a couple tomorrow.

Thanks again.
Post Reply