• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

Flexing wings

General discussion on any topic which doesn't have a natural home on any of the other boards.
B Sharp

Re: Flexing wings

Post by B Sharp »

I concur with the others. I too have used double joiners when at that weight and above. However it has to be said that I tend to throw the model around a lot. For gentle flying a single should be adequate.
That leads me to think that if your wings are flapping around a lot then there is something else going on with your joiner system. Time for some investigative surgery perhaps?
Brian. :(
Andy Wallace
Posts: 38
Joined: 05 Sep 2017, 13:11
Location: COLERAINE Northern Ireland

Re: Flexing wings

Post by Andy Wallace »

Big thanks to everyone who took the time to reply, I took the top off the model tonight to get a look at the wing joiner setup and was shocked what I found :o :o
I'm going to have to revamp the whole wing joiner setup plus I'll put in the second steel rod
Only thing I need to know is what the proper dihedral is
Thank you all
Andrew
User avatar
chris williams
Posts: 1549
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: Flexing wings

Post by chris williams »

Usually around 3 degrees per wing...
Post Reply