Don't forget to check your spam folder if you don't get an activation email after joining!!

0.4 GL1 or SATCO ply

General discussion on any topic which doesn't have a natural home on any of the other boards.
Post Reply
Brian Gowland
Posts: 3
Joined: 28 May 2019, 16:05
Location: North Wales
Contact:

0.4 GL1 or SATCO ply

Post by Brian Gowland »

Hi guys, having difficulty sourcing large sheets of 0.4 mm (16 thou) ply.
Preferably GL1. or SATCO. Stamped..
1200 X 1200 or 1500 x1500 .
Regards Brian

Post Reply