-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Fitting incidence tubes in wing
- chris williams
- Posts: 1573
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: Fitting incidence tubes in wing
Yes, all you have to do is notch the cap strips for the front of the gussets so that they are flush, and overlap the TE to about half the width of the balsa lamination, then feather the ply out to a minimum thickness... This Flamingo rudder will give you the idea.
-
- Posts: 187
- Joined: 26 Dec 2018, 08:45
- Location: Hungary
Re: Fitting incidence tubes in wing
Thanks for the reply Chris.