-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Wing joiner
-
- Posts: 17
- Joined: 12 Sep 2021, 20:54
- Location: Powys
Wing joiner
Evening I'm building a Scheibe-Loravia Topaz the plan uses a 14mm graupner steel bar & brass box which is like rocking horse .
I can source 12mm and 15mm but what would everyone recommend. Many thanks
I can source 12mm and 15mm but what would everyone recommend. Many thanks
- chris williams
- Posts: 1574
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: Wing joiner
James, you can't get the 14mm any more. The 15mm will be fine, just adapt the ply support accordingly... (Note the brass box is 16mm)
-
- Posts: 17
- Joined: 12 Sep 2021, 20:54
- Location: Powys
Re: Wing joiner
Thanks for that, as I'm not 100% sure are you the same person as the designer ?? If so ive got 1 more question about the F6a retro fitchris williams wrote: ↑05 Jan 2022, 20:34 James, you can't get the 14mm any more. The 15mm will be fine, just adapt the ply support accordingly... (Note the brass box is 16mm)
- Trevor
- Posts: 162
- Joined: 19 Jul 2016, 16:29
- Location: Hampshire
- Contact:
- chris williams
- Posts: 1574
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: Wing joiner
No prob James, fire away...
-
- Posts: 17
- Joined: 12 Sep 2021, 20:54
- Location: Powys
Re: Wing joiner
-
- Posts: 17
- Joined: 12 Sep 2021, 20:54
- Location: Powys
Re: Wing joiner
Ok on the plan I've got f6a is a piece which is angled in front of former f6 but I've seen a different set of plans where there's a f6a former between f6 and f7. I'm not sure if it should have one there's definitely not one in the laser pack just wondering if it's been missed off by sarik or just not needed cheers.
- chris williams
- Posts: 1574
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: Wing joiner
First up, James, have you had all the build pics from me...!
-
- Posts: 17
- Joined: 12 Sep 2021, 20:54
- Location: Powys
Re: Wing joiner
Yes I havechris williams wrote: ↑06 Jan 2022, 09:51 First up, James, have you had all the build pics from me...!