• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

Small Screws.

Anything to do with gliders & gliding.
Nigel Argall
Posts: 138
Joined: 20 Mar 2015, 18:26
Location: Cornwall

Re: Small Screws.

Post by Nigel Argall »

Mick Reeves does a load of tiny screws - should be at the bottom of this page:

http://mickreevesmodels.co.uk/~mickreev ... sories.htm
Mark Erwood

Re: Small Screws.

Post by Mark Erwood »

Hi Antony,

I haven't looked to see if they list the size you want but I use 'Kayfast' for a lot of my fastenings. I have always had good service too.

Mark
User avatar
Peter Balcombe
Posts: 1399
Joined: 18 Mar 2015, 10:13
Location: Clevedon, North Somerset, U.K.

Re: Small Screws.

Post by Peter Balcombe »

Kayfast Ltd list Pan Head No.2 x 1/4” for £0.01 each in zinc plated steel.
Lots of fixings to choose from.
User avatar
VinceC
Site Admin
Posts: 613
Joined: 22 Feb 2015, 11:45
Contact:

Re: Small Screws.

Post by VinceC »

I bought my last ones off eBay
Ian Stromberg
Posts: 18
Joined: 17 Mar 2015, 22:34
Location: Cheshire

Re: Small Screws.

Post by Ian Stromberg »

Model fixings have very small self tappers which look small enough. I've used quite a few of the 0 size.

http://www.modelfixings.co.uk/self_tapping_screws.htm
Barry_Cole

Re: Small Screws.

Post by Barry_Cole »

Anthony wrote: 10 Mar 2019, 15:28 Thanks everybody, now sorted and found a few more suppliers of minuscule hardware bits.

Thanks Ant.
Let us know who they are Anthony??

BC
Chas Smith

Re: Small Screws.

Post by Chas Smith »

Hi Anthony
I have had good luck finding very small screws at AliExpress. It may take a couple of weeks but I got several hundred various sizes for a few $ used on my ASH 26 aileron servo cover plates.
Charles
Post Reply