Page 1 of 2

Small Screws.

Posted: 05 Mar 2019, 20:32
by Anthony
I need help sourcing very small screws please, tried modelfixings, nothing this small.
5-6mm long, the thread is a self tapper around 2mm and the head is roughly 3.5mm, should almost be a panhead as well, very little room for the protruding head. TIA Ant.

Re: Small Screws.

Posted: 05 Mar 2019, 21:26
by Nigel Argall
Mick Reeves does a load of tiny screws - should be at the bottom of this page:

http://mickreevesmodels.co.uk/~mickreev ... sories.htm

Re: Small Screws.

Posted: 06 Mar 2019, 12:20
by Mark Erwood
Hi Antony,

I haven't looked to see if they list the size you want but I use 'Kayfast' for a lot of my fastenings. I have always had good service too.

Mark

Re: Small Screws.

Posted: 06 Mar 2019, 14:04
by Peter Balcombe
Kayfast Ltd list Pan Head No.2 x 1/4” for £0.01 each in zinc plated steel.
Lots of fixings to choose from.

Re: Small Screws.

Posted: 07 Mar 2019, 10:48
by VinceC
I bought my last ones off eBay

Re: Small Screws.

Posted: 07 Mar 2019, 11:17
by Ian Stromberg
Model fixings have very small self tappers which look small enough. I've used quite a few of the 0 size.

http://www.modelfixings.co.uk/self_tapping_screws.htm

Re: Small Screws.

Posted: 10 Mar 2019, 15:28
by Anthony
Thanks everybody, now sorted and found a few more suppliers of minuscule hardware bits.

Thanks Ant.

Re: Small Screws.

Posted: 10 Mar 2019, 17:41
by Barry_Cole
Anthony wrote:
10 Mar 2019, 15:28
Thanks everybody, now sorted and found a few more suppliers of minuscule hardware bits.

Thanks Ant.
Let us know who they are Anthony??

BC

Re: Small Screws.

Posted: 10 Mar 2019, 19:22
by Anthony
Suppliers found are:-

Modelfixings.
Mick Reeves
KayFast Ltd.
Barfast Engineering Supplies.
eBay.

Mick Reeves screws etc are miniscule.

Re: Small Screws.

Posted: 14 Jul 2019, 01:36
by Chas Smith
Hi Anthony
I have had good luck finding very small screws at AliExpress. It may take a couple of weeks but I got several hundred various sizes for a few $ used on my ASH 26 aileron servo cover plates.
Charles