I have a free plan for the Gull which needs a builder to prove it.
It is a 1:3 scale model with a wingspan of 5 meters and can be built with or without struts
Laser cut parts are available from Cliff Evans
Anyone interested
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Slingsby Kirby Gull plan
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
-
- Posts: 275
- Joined: 18 Mar 2015, 14:29
- Location: Gloucestershire
Re: Slingsby Kirby Gull plan
Very nice Vince, I hope whoever builds one does a build thread.
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
Re: Slingsby Kirby Gull plan
Jean Marie - the plans have been sent email
-
- Posts: 42
- Joined: 19 Mar 2015, 07:08
- Location: Cape Town S. Africa
Re: Slingsby Kirby Gull plan
Hi Vince, I have been building the Slingsby Gull from the Jim Owen plan, reduced from 1/3 to 1/3.5. Should be finished by the middle of next month, I did change the shape of the formers to conform better with Martin Simons's cross sections.
Willam
Willam
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
Re: Slingsby Kirby Gull plan
I agree with Cliff about concerns over Martin Simons 3-views, although I highly respect all of his work.
As regards the sections, Our new drawing uses data gathered from the original factory drawings. I am quite happy to send you our drawings along with the factory drawings we have, although I feel it may be too late.
As regards the sections, Our new drawing uses data gathered from the original factory drawings. I am quite happy to send you our drawings along with the factory drawings we have, although I feel it may be too late.
-
- Posts: 42
- Joined: 19 Mar 2015, 07:08
- Location: Cape Town S. Africa
Re: Slingsby Kirby Gull plan
Thanks for the offer, Vince, but I'm afraid it is too late! I've just printed the Jim Owen Rhonbussard, are his formers more accurate than what M.S. has on his drawing?
William
William
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
-
- Posts: 42
- Joined: 19 Mar 2015, 07:08
- Location: Cape Town S. Africa
Re: Slingsby Kirby Gull plan
Thanks Vince, the 3 view confirms that the fus has the semicircular top, sharp bottom as per M S's drawing. The free plan has then somewhat different.
William
William
-
- Posts: 575
- Joined: 30 May 2015, 20:35
- Location: Sutton Bank, North Yorkshire