• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

SZD - 36 Cobra 15 1:3 scale

Let us all watch your new project progress.
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Holes cut out, spacers inserted and aileron set in place.
Attachments
101.JPG
102.JPG
103.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

On the wing side, I glued spacers.
Attachments
104.JPG
105.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

... and reinforced them with epoxy and cotton fibers.
Attachments
107.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

With such an aileron, model response is very good.
Attachments
108.JPG
109.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Both wings put together, so I can see how they fit.
Attachments
110.JPG
111.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Covers for servo and "maintenance" holes...

On a place where the cover will be I made a sketch.
Attachments
112.JPG
113.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

I made a cut 1mm wider than sketch, and a bit more on the corners.
Attachments
114.JPG
115.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

Frame on which the cover will be fixed is made of samba wood from Africa.
Attachments
116.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

On the edge of the cover I drilled some holes, a bit smaler than the screw will be. I temporarily taped it in place and drilled holes in the frame too.
Attachments
117.JPG
118.JPG
skyhawk92

Re: SZD - 36 Cobra 15 1:3 scale

Post by skyhawk92 »

I enlarged holes on the cover and screwed it in place to see how it fits. The gap that remains will be filled later, when other covers are made.
Attachments
119.JPG
120.JPG
121.JPG
Post Reply