SZD - 36 Cobra 15 1:3 scale

skyhawk92 · Post by **skyhawk92** » 23 Feb 2017, 05:47

Holes cut out, spacers inserted and aileron set in place.

skyhawk92 · Post by **skyhawk92** » 23 Feb 2017, 05:48

On the wing side, I glued spacers.

skyhawk92 · Post by **skyhawk92** » 23 Feb 2017, 05:48

... and reinforced them with epoxy and cotton fibers.

skyhawk92 · Post by **skyhawk92** » 23 Feb 2017, 05:49

With such an aileron, model response is very good.

skyhawk92 · Post by **skyhawk92** » 23 Feb 2017, 05:49

Both wings put together, so I can see how they fit.

skyhawk92 · Post by **skyhawk92** » 28 Feb 2017, 06:03

Covers for servo and "maintenance" holes...

On a place where the cover will be I made a sketch.

skyhawk92 · Post by **skyhawk92** » 28 Feb 2017, 06:04

I made a cut 1mm wider than sketch, and a bit more on the corners.

skyhawk92 · Post by **skyhawk92** » 28 Feb 2017, 06:04

Frame on which the cover will be fixed is made of samba wood from Africa.

skyhawk92 · Post by **skyhawk92** » 03 Mar 2017, 06:13

On the edge of the cover I drilled some holes, a bit smaler than the screw will be. I temporarily taped it in place and drilled holes in the frame too.

skyhawk92 · Post by **skyhawk92** » 03 Mar 2017, 06:13

I enlarged holes on the cover and screwed it in place to see how it fits. The gap that remains will be filled later, when other covers are made.

Scale Soaring UK

SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale

Re: SZD - 36 Cobra 15 1:3 scale