SZD - 36 Cobra 15 1:3 scale

skyhawk92 · Post by **skyhawk92** » 13 Oct 2017, 07:35

Whole wing is attached with elastics to keep it aligned correctly.

skyhawk92 · Post by **skyhawk92** » 24 Oct 2017, 14:02

Custom made template, before cutting of the canopy.

skyhawk92 · Post by **skyhawk92** » 24 Oct 2017, 14:03

Canopy, that will be later used as a mold.

skyhawk92 · Post by **skyhawk92** » 13 Nov 2017, 12:39

Template for wing placement.

skyhawk92 · Post by **skyhawk92** » 13 Nov 2017, 12:39

First rib, which will be later glued to the fuselage is taped to the wing.

skyhawk92 · Post by **skyhawk92** » 04 Dec 2017, 07:57

Wings aligned and centered.

skyhawk92 · Post by **skyhawk92** » 04 Dec 2017, 07:57

Just to hold it in place, I put microbaloon+epoxy in some places.

skyhawk92 · Post by **skyhawk92** » 05 Dec 2017, 06:45

Once hardened, I sealed the gap on the lower side, then poured in some thinner mix of microbaloon+epoxy and thicker one at the end.

skyhawk92 · Post by **skyhawk92** » 07 Dec 2017, 10:44

Roughly sanded in shape. Final touches will be done when wings are finished, just before painting.

Post by **chris williams** » 07 Dec 2017, 11:30

Looking good...

Scale Soaring UK