-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
SZD - 36 Cobra 15 1:3 scale
Re: SZD - 36 Cobra 15 1:3 scale
Hinges are made same way as on wings except that bearings are also used here.
On front slats are glued.
On front slats are glued.
Re: SZD - 36 Cobra 15 1:3 scale
Added carbon fibres at the rear, and covered rest of the rudder.
Re: SZD - 36 Cobra 15 1:3 scale
Holes are cut, where the hinges are. Expoxy+microballon is applied on the round part of the rudder and sanded.
Re: SZD - 36 Cobra 15 1:3 scale
With elevator, slightly different type of building is used.
- Martynk
- Posts: 61
- Joined: 23 Mar 2017, 21:23
- Location: Willaston
- Contact:
Re: SZD - 36 Cobra 15 1:3 scale
Lovely build
Some very different build methods there as well. I guess that I will have to wait for the next instalment to see how the underside of the elevator is built
Some very different build methods there as well. I guess that I will have to wait for the next instalment to see how the underside of the elevator is built
Re: SZD - 36 Cobra 15 1:3 scale
There it is
Cover finished and sanded just like on fuselage.
Cover finished and sanded just like on fuselage.
Re: SZD - 36 Cobra 15 1:3 scale
On top of it, thinner mix of epoxy and microballons is applied and a 25g glass fiber.