-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
SZD - 36 Cobra 15 1:3 scale
Re: SZD - 36 Cobra 15 1:3 scale
Ribs for elevator are made from 3 mm balsa, glued between and 5mm balsa used in the middle.
Re: SZD - 36 Cobra 15 1:3 scale
Fixed everything same way as on wings and weighted everything.
Re: SZD - 36 Cobra 15 1:3 scale
Vertical reinforcement for tail, made out of plywood. Servo for elevator will be inside of this.
Re: SZD - 36 Cobra 15 1:3 scale
Edge of the tail sanded to right shape and vertical reinforcement glued in place. A bit of glass fiber and epoxy is also added on the edge.
- Martynk
- Posts: 61
- Joined: 23 Mar 2017, 21:23
- Location: Willaston
- Contact:
Re: SZD - 36 Cobra 15 1:3 scale
What is the box for that is attached to the rudder?
Superb craftsmanship by the way.
Superb craftsmanship by the way.
-
- Posts: 88
- Joined: 18 Mar 2015, 23:33
- Location: USA