• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

ORLIC

Let us all watch your new project progress.
john greenfield
Posts: 497
Joined: 18 Mar 2015, 07:52
Contact:

Re: ORLIC

Post by john greenfield »

Fuz sheeting pic.jpg
MarkDev wrote: 26 Feb 2018, 16:38 Thats less work for Geoff then! Just as a matter of interest John, what thickness (was ply used in 1939?)was the original Orlic covering?
I think it was 1.5mm but may have been 2mm around the nose.

AEB
AEB = Aeronautical Energiser Bunny (with thanks to CW)
Geoff Pearce

Re: ORLIC

Post by Geoff Pearce »

A bit more done, plug for canopy finished, started on wings.....
Attachments
image.jpeg
image.jpeg
User avatar
Simon WS
Posts: 205
Joined: 18 Mar 2015, 11:39
Location: Kent, UK

Re: ORLIC

Post by Simon WS »

Looking good Geoff - I may have to build a "woody" one day!...

Simon
Geoff Pearce

Re: ORLIC

Post by Geoff Pearce »

Simon WS wrote: 01 Apr 2018, 18:07 Looking good Geoff - I may have to build a "woody" one day!...

Simon
Thanks Si, a whole new world , but for adrenaline you can't beat a mouldy....... :arrow: :cry: :lol:
User avatar
terry white
Posts: 508
Joined: 18 Mar 2015, 21:08
Location: wareham,dorset.england

Re: ORLIC

Post by terry white »

Hi Geoff,Very pretty plug,no mistaking that.
Geoff Pearce

Re: ORLIC

Post by Geoff Pearce »

Just made bench to build 2.2m wing thing :lol:
Attachments
image.jpeg
catwok
Posts: 134
Joined: 24 Apr 2015, 12:15
Location: Rugeley

Re: ORLIC

Post by catwok »

Crikey Geoff there's a lot of wash out on the tip rib!
Geoff Pearce

Re: ORLIC

Post by Geoff Pearce »

MarkDev wrote: 14 Apr 2018, 17:17 Thats going to be a rather large pile of wood! How do you keep them ribs square?

See you in the week.

M
With a set square, 90'deg off spares
Geoff Pearce

Re: ORLIC

Post by Geoff Pearce »

A bit more done.
Attachments
image.jpeg
User avatar
VinceC
Site Admin
Posts: 613
Joined: 22 Feb 2015, 11:45
Contact:

Re: ORLIC

Post by VinceC »

For interest, this guy is a serious model builder. In fact he is building a brand new full size Orlik to celebrate its' 100th Anniversary

http://www.przegladkoninski.pl/PL-H45/4 ... kiego.html
Post Reply