Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Let us all watch your new project progress.
john greenfield
Posts: 497 Joined: 18 Mar 2015, 07:52
Contact:
Post
by john greenfield » 27 Feb 2018, 08:05
MarkDev wrote: ↑ 26 Feb 2018, 16:38
Thats less work for Geoff then! Just as a matter of interest John, what thickness (was ply used in 1939?)was the original Orlic covering?
I think it was 1.5mm but may have been 2mm around the nose.
AEB
AEB = Aeronautical Energiser Bunny (with thanks to CW)
Geoff Pearce
Post
by Geoff Pearce » 01 Apr 2018, 16:23
A bit more done, plug for canopy finished, started on wings.....
Attachments
Simon WS
Posts: 205 Joined: 18 Mar 2015, 11:39
Location: Kent, UK
Post
by Simon WS » 01 Apr 2018, 18:07
Looking good Geoff - I may have to build a "woody" one day!...
Simon
Geoff Pearce
Post
by Geoff Pearce » 01 Apr 2018, 18:20
Simon WS wrote: ↑ 01 Apr 2018, 18:07
Looking good Geoff - I may have to build a "woody" one day!...
Simon
Thanks Si, a whole new world , but for adrenaline you can't beat a mouldy.......
terry white
Posts: 508 Joined: 18 Mar 2015, 21:08
Location: wareham,dorset.england
Post
by terry white » 01 Apr 2018, 21:25
Hi Geoff,Very pretty plug,no mistaking that.
Geoff Pearce
Post
by Geoff Pearce » 14 Apr 2018, 11:19
Just made bench to build 2.2m wing thing
Attachments
catwok
Posts: 134 Joined: 24 Apr 2015, 12:15
Location: Rugeley
Post
by catwok » 14 Apr 2018, 13:04
Crikey Geoff there's a lot of wash out on the tip rib!
Geoff Pearce
Post
by Geoff Pearce » 14 Apr 2018, 21:35
MarkDev wrote: ↑ 14 Apr 2018, 17:17
Thats going to be a rather large pile of wood! How do you keep them ribs square?
See you in the week.
M
With a set square, 90'deg off spares
Geoff Pearce
Post
by Geoff Pearce » 15 Apr 2018, 15:34
A bit more done.
Attachments