-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
SZD - 36 Cobra 15 1:3 scale
Re: SZD - 36 Cobra 15 1:3 scale
Elevator mount, made of GFK plate and axes made from brass.
Re: SZD - 36 Cobra 15 1:3 scale
Elevator is used as a negative. I've put a tape on the elevator where the elevator mount is going to be, applied few layers of glass fibers and immediately a layer of microbaloon. Then I've placed the elevator mount on the elevator.
- terry white
- Posts: 508
- Joined: 18 Mar 2015, 21:08
- Location: wareham,dorset.england
Re: SZD - 36 Cobra 15 1:3 scale
Excellent work again Skyhawk92.
- Simon WS
- Posts: 205
- Joined: 18 Mar 2015, 11:39
- Location: Kent, UK
Re: SZD - 36 Cobra 15 1:3 scale
Yes, looking really good...
Simon
Simon
Re: SZD - 36 Cobra 15 1:3 scale
After it dried, I drilled holes for the elevator mount, roughly cut it and draw the position. On the places where screws will be I inserted small tubes and on the upper side a piece of plastic tube and glued it.
Re: SZD - 36 Cobra 15 1:3 scale
Elevator mount fixed in place and checked, how everything together looks.
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact: