-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Minimoa MO2a -Chris Williams plan and Cliff Evans kit
Re: minimoa mo2a -chris williams plan and cliff evans kit
hi Chris
thanks for the pdf
the width of mine is 145mm , i have put the 3mm sq for the frame etc
the width of the top part of former on the plan and former itself is 125 mm
the last lot you sent i enlarged on photocopier to have correct width 145mm
but when i offered up it was the wrong curve
i think i will make one up in situ with .8 mm ply strips to get correct curve
it’s a strange one , it’s a challenge but will get there
thanks for the pdf
the width of mine is 145mm , i have put the 3mm sq for the frame etc
the width of the top part of former on the plan and former itself is 125 mm
the last lot you sent i enlarged on photocopier to have correct width 145mm
but when i offered up it was the wrong curve
i think i will make one up in situ with .8 mm ply strips to get correct curve
it’s a strange one , it’s a challenge but will get there
- chris williams
- Posts: 1573
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: minimoa mo2a -chris williams plan and cliff evans kit
Mick, what's the width of the fuselage at F7?
cw
cw
- chris williams
- Posts: 1573
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: minimoa mo2a -chris williams plan and cliff evans kit
OK, the fog lifts a little...F6a is actually missing from the plan, so I don't know what the part you have labelled F6a actually is. Here is a PDF of F6a which I eventually found on my PC!
Cliff, can you add it to the plan file?
Cliff, can you add it to the plan file?
- Attachments
-
- F6a.pdf
- (223.11 KiB) Downloaded 259 times
Re: minimoa mo2a -chris williams plan and cliff evans kit
thanks Chris
sorry to cause you headaches
that looks a lot better
sorry to cause you headaches
that looks a lot better
- chris williams
- Posts: 1573
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: minimoa mo2a -chris williams plan and cliff evans kit
No worries, Mick, best to get it sorted
Re: minimoa mo2a -chris williams plan and cliff evans kit
does this look like the minimoa 2a to anyone else ?
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
Re: minimoa mo2a -chris williams plan and cliff evans kit
it is an Hungarian M-22 registration HA-4036. The dark bar on the bottom of the rudder gave it away as being Hungarian
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact: