Mick Reeves does a load of tiny screws - should be at the bottom of this page:
http://mickreevesmodels.co.uk/~mickreev ... sories.htm
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Small Screws.
Re: Small Screws.
Hi Antony,
I haven't looked to see if they list the size you want but I use 'Kayfast' for a lot of my fastenings. I have always had good service too.
Mark
I haven't looked to see if they list the size you want but I use 'Kayfast' for a lot of my fastenings. I have always had good service too.
Mark
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Small Screws.
Kayfast Ltd list Pan Head No.2 x 1/4” for £0.01 each in zinc plated steel.
Lots of fixings to choose from.
Lots of fixings to choose from.
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
Re: Small Screws.
I bought my last ones off eBay
-
- Posts: 18
- Joined: 17 Mar 2015, 22:34
- Location: Cheshire
Re: Small Screws.
Model fixings have very small self tappers which look small enough. I've used quite a few of the 0 size.
http://www.modelfixings.co.uk/self_tapping_screws.htm
http://www.modelfixings.co.uk/self_tapping_screws.htm
Re: Small Screws.
Hi Anthony
I have had good luck finding very small screws at AliExpress. It may take a couple of weeks but I got several hundred various sizes for a few $ used on my ASH 26 aileron servo cover plates.
Charles
I have had good luck finding very small screws at AliExpress. It may take a couple of weeks but I got several hundred various sizes for a few $ used on my ASH 26 aileron servo cover plates.
Charles