Don't forget to check your spam folder if you don't get an activation email after joining!!
GenesisII
-
Rich vale
- Posts: 60
- Joined: 19 Mar 2015, 19:52
Re: GenesisII
Elevator pushrod setup
- Attachments
-
- Fin bones
-
- push rod and belcranks
-
- 3d printed belcranks
-
Rich vale
- Posts: 60
- Joined: 19 Mar 2015, 19:52
Re: GenesisII
Fuselage parts assembled around double wing steel tubes.
- Attachments
-
- Basic bones
-
- Start of fuse woodwork
-
- fuse and wing steel box
-
Rich vale
- Posts: 60
- Joined: 19 Mar 2015, 19:52
Re: GenesisII
Good progress so far
- Attachments
-
- Fin assembly attached
-
- canopy fillets and nose retract
-
- General layout
-
- rear retract
-
- front retract
-
- Ready to sheet
-
Rich vale
- Posts: 60
- Joined: 19 Mar 2015, 19:52
Re: GenesisII
Sheeting finished on fuselage apart from filling and glassing. Wings first fit to fuselage. Next to flair wings to fuselage ready for glassing.
- Attachments
-
- ready for filling at root joint
-
- It is bigger than it looks in sections
-
- wing fillets to be faired in
-
- All steels and rear pegs line up well
-
-
Foxsoar
- Posts: 4
- Joined: 22 Jan 2019, 11:47
- Location: USA
Re: GenesisII
Rich,
Do you have a estimate on weight yet?
Mike
Do you have a estimate on weight yet?
Mike
-
Foxsoar
- Posts: 4
- Joined: 22 Jan 2019, 11:47
- Location: USA
Re: GenesisII
Here are a couple picture on mine flying at last months aero tow. Had some good rides with it. You can never loose your plane, as it looks different than the rest 
- Attachments
-
-
-
-
-
Rich vale
- Posts: 60
- Joined: 19 Mar 2015, 19:52
-
mick a
- Posts: 264
- Joined: 20 Mar 2015, 22:00
- Location: kent
Re: GenesisII
looking good cliff
have you got them on your site ?
have you got them on your site ?
-
AndyB65
- Posts: 1
- Joined: 09 Dec 2018, 19:12
- Location: Melbourne
Re: GenesisII
Just wondering if there are any updates on the build?
-
Cliff Evans
- Posts: 379
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact: