The wing joiner boxes and their packing pieces were slid into place and glued up. At the moment there is no easy way for me to check their alignment so I will just have to trust in the laser cutting. The webbing between the spars has been added, 1/16 ply at the wing root and 1/16 balsa the rest of the way to the tip.
The upper leading edge sheeting has been glued and pinned in place. I nearly ran out of pins! I also cut out the slots for the airbrakes and dry – fitted the assembly in place. I have uses 0.225 electric units from “Gliders” as I have found them to be reliable in the past and it saves me messing about with servos and pushrods.
The weather forecast for the next few days is a bit variable so I suspect I will get some more of the upper surface sheeting in place quite soon.
Brian.
![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)