Hello,
Drawings of the Schleicher K 8B can be found here in the download of the magazine "Flugmodell"
https://www.flugmodell-magazin.de/downl ... ugzeugbau/
Drawing © by H.-J.Fischer
Best regards
Hans-Jürgen
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Drawing Schleicher K 8B
-
- Posts: 173
- Joined: 18 Mar 2015, 17:53
Re: Drawing Schleicher K 8B
Excellent as ever - thank you for sharing.
Paul
Paul
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: Drawing Schleicher K 8B
Just a little note nothing significant but the drawing description specifies K8B. This is in my opinion incorrect. With the canopy shown it is a K8
This smaller canopy was supplied with the initial production run, later a full blown canopy was supplied to replace the small one and the model was called K8B. I do know because I did fly both full scale options myself last century.
For your info, after I have completed the current design job for Cliff Evans the plan is to design a K8 model for myself at 4.8m wing span (ETA april 2020) . This is then the same scale as my Ka6E design
The K8 design will have both canopy options for a potential builder to choose from
This smaller canopy was supplied with the initial production run, later a full blown canopy was supplied to replace the small one and the model was called K8B. I do know because I did fly both full scale options myself last century.
For your info, after I have completed the current design job for Cliff Evans the plan is to design a K8 model for myself at 4.8m wing span (ETA april 2020) . This is then the same scale as my Ka6E design
The K8 design will have both canopy options for a potential builder to choose from
-
- Posts: 5
- Joined: 16 Jan 2018, 17:08
- Location: Haltern am See
Re: Drawing Schleicher K 8B
Very interesting for me to hear that you are planning an K8. Could be a new project for me too.
Will you publish your drawings Jilles?
Will you publish your drawings Jilles?
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: Drawing Schleicher K 8B
When complete (april 2020)the drawings will be available and parts NC cut by Cliff Evans
-
- Posts: 5
- Joined: 16 Jan 2018, 17:08
- Location: Haltern am See
Re: Drawing Schleicher K 8B
Thank you Jilles!