Don't forget to check your spam folder if you don't get an activation email after joining!!

SDZ-8 JAKOLSKA 1/3

Let us all watch your new project progress.
Keith
Posts: 83
Joined: 07 Jan 2019, 18:18
Location: Lincolnshire

SDZ-8 JAKOLSKA 1/3

Post by Keith »

Hi all, well got my new project from Cliff few days ago 1/3 scale Jakolska drawn by Jilles, second set of drawings I have had from Jilles, really detailed. Cliff has done a fantastic job of cutting the kit out so clean and crisp. Plus has supplied flap tracks, and nose cone 3D printed.
I'll keep you updated on the build as best I can, not going to be a quick build but I'll do my best.
Attachments
20200125_105853.jpg
20200125_105853.jpg (83.98 KiB) Viewed 2101 times
20200125_110235.jpg
20200125_110235.jpg (102.19 KiB) Viewed 2101 times
20200125_110301.jpg
20200125_110301.jpg (99.45 KiB) Viewed 2101 times
20200130_142533.jpg
20200130_142533.jpg (74.6 KiB) Viewed 2101 times
20200130_142621.jpg
20200130_142621.jpg (74.62 KiB) Viewed 2101 times

Elliot Howells
Posts: 246
Joined: 18 Mar 2015, 08:18
Location: West Wales
Contact:

Re: SDZ-8 JAKOLSKA 1/3

Post by Elliot Howells »

Great stuff! keep photos coming Keith ;)

Dopieman1
Posts: 43
Joined: 09 Mar 2018, 09:42
Location: Den Bosch

Re: SDZ-8 JAKOLSKA 1/3

Post by Dopieman1 »

The Jaskolka is one of my favorites! Ik will follow. Thanks for sharing.

Keith
Posts: 83
Joined: 07 Jan 2019, 18:18
Location: Lincolnshire

Re: SDZ-8 JAKOLSKA 1/3

Post by Keith »

Ok more building been taking place, thanks to Cliff I can now put more pictures up.
Attachments
Tailplane bearing and attachment assy
Tailplane bearing and attachment assy
Image1.jpg (34.9 KiB) Viewed 1841 times
2.jpg
2.jpg (40.38 KiB) Viewed 1841 times
Main plane joiner assy
Main plane joiner assy
3.jpg (23.18 KiB) Viewed 1841 times
Wing blade tubes x2 each side
Wing blade tubes x2 each side
4.jpg (39.63 KiB) Viewed 1841 times

roo Hawkins
Posts: 832
Joined: 18 Mar 2015, 20:12
Location: Northamptonshire

Re: SDZ-8 JAKOLSKA 1/3

Post by roo Hawkins »

Lovely glider I have John watkins jaskolka the original one he built.will be following.
Attachments
20190620_121013.jpg

John Vella
Posts: 243
Joined: 20 Mar 2017, 22:09
Location: UK

Re: SDZ-8 JAKOLSKA 1/3

Post by John Vella »

roo Hawkins wrote:
06 Feb 2020, 18:14
Lovely glider I have John watkins jaskolka the original one he built.will be following.
Roo, I remember that glider very well and as you say a lovely glider posed at my old stomping ground Ivinghoe unless I am mistaken. Regards John.

jack
Posts: 96
Joined: 20 Mar 2015, 21:55
Location: chepstow,south wales

Re: SDZ-8 JAKOLSKA 1/3

Post by jack »

So nice its a shame to cover it :lol: :lol: :lol: ,good job,good luck with the build,jack :) :) :)

Keith
Posts: 83
Joined: 07 Jan 2019, 18:18
Location: Lincolnshire

Re: SDZ-8 JAKOLSKA 1/3

Post by Keith »

Ok some work carried out to fuse, main wing incedance doubler glued in, canopy/cockpit shelf attached sorry about the weights there just to keep everything flat, I'm enjoying the build chamfering the joints takes time. Secured the fin vertical hope to get the logerons in tomorrow. Just recieved the canopy nice moulding from Sarak.
Attachments
20200210_165453.jpg
20200205_140552.jpg
20200205_140602.jpg
20200210_165508.jpg

Keith
Posts: 83
Joined: 07 Jan 2019, 18:18
Location: Lincolnshire

Re: SDZ-8 JAKOLSKA 1/3

Post by Keith »

A little more work done, stringers attached and cockpit sill added, rudder started, and rear incidence doubler fitted, sorry I cant make this exciting but if you built a large model some things go together quickly some need a little fetling, on the whole it is going together well. Stay tuned ;) ;)
Attachments
20200218_132053.jpg
20200218_132039.jpg
20200218_132111.jpg
20200210_165425.jpg

Dopieman1
Posts: 43
Joined: 09 Mar 2018, 09:42
Location: Den Bosch

Re: SDZ-8 JAKOLSKA 1/3

Post by Dopieman1 »

Keith wrote:
10 Feb 2020, 19:42
Ok some work carried out to fuse, main wing incedance doubler glued in, canopy/cockpit shelf attached sorry about the weights there just to keep everything flat, I'm enjoying the build chamfering the joints takes time. Secured the fin vertical hope to get the logerons in tomorrow. Just recieved the canopy nice moulding from Sarak.
Good to hear about the availability of a canopy! Saves a lot of work making a plug! If I wasn't so busy with an Ikarus Meteor I would have joined you in building a Jaskolka ;)

Post Reply