People are joining and then emailing me to ask for plans. We do expect you to contribute to the community before being granted this option. I have added a section to the rules of the forum to cover this.

WHO'S BUILDING WHAT FOR 2020...?

Anything to do with gliders & gliding.
User avatar
chris williams
Posts: 1106
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by chris williams »

Minimoa maiden today...super!
Attachments
Image1.jpg
2.jpg
3.jpg
4.jpg
5.jpg

User avatar
Cliff Evans
Posts: 129
Joined: 29 Dec 2019, 15:13
Location: Bristol
Contact:

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by Cliff Evans »

Looks good as usual Chris. Well done. Again!!!

StephenB
Posts: 126
Joined: 26 Dec 2018, 08:45
Location: Hungary

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by StephenB »

Looks great!

Maiden off the flat? Do you hand launch before committing to the tow to check all is ok?

Cliff, what happened to the supersize photos we used to get with a couple of clicks, has that option been lost in the forum update?

User avatar
Cliff Evans
Posts: 129
Joined: 29 Dec 2019, 15:13
Location: Bristol
Contact:

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by Cliff Evans »

Looking into it Stephen. Some threads are showing bigger pics.

User avatar
Cliff Evans
Posts: 129
Joined: 29 Dec 2019, 15:13
Location: Bristol
Contact:

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by Cliff Evans »

Cliff Evans wrote:
06 Feb 2020, 08:58
Looking into it Stephen. Some threads are showing bigger pics.
Ok, have found a setting that had changed and has been resizing images when uploaded. Have changed that now so that it does not do that anymore. All images uploaded before I changed this setting will be smaller so if you want bigger images to display in the lightbox, you will have to delete the posted images and re-post

User avatar
chris williams
Posts: 1106
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by chris williams »

You need a breeze to hand launch even a small model, and there was no appreciable wind on the day. I have always tried to do this when I could: the heaviest model I have ever hand launched on the flat was my 3rd scale Habicht (32lbs)... I couldn't do that now!

User avatar
chris williams
Posts: 1106
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by chris williams »

On the same day as the Minimoa maiden, Peter Chaldecott's little Wolf had it's first aerotow. Despite the scary take off, Peter's out of therapy now...!
Attachments
IMG_3494 copy.jpg
IMG_3499 copy.jpg
IMG_3511.JPG

User avatar
Cliff Evans
Posts: 129
Joined: 29 Dec 2019, 15:13
Location: Bristol
Contact:

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by Cliff Evans »

Our newest member "mAtzi" from Austria has sent me some photos and a link to a video of his scratch-built Scud-1. It is built to a scale of 1/2.5

k-IMG_4981 IMG_2157.JPG
k-IMG_4850.JPG
k-IMG_4875.JPG
k-IMG_4915.JPG
k-IMG_4926 IMG_2150 retroplane.jpg
k-IMG_4926 IMG_2150 retroplane.jpg (13.6 KiB) Viewed 386 times
k-IMG_4926 retroplane..jpg
k-IMG_4929 retroplane..jpg
k-IMG_4963.JPG

User avatar
B Sharp
Posts: 673
Joined: 19 Mar 2015, 17:18
Location: Perthshire

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by B Sharp »

This build has been a long time coming, having been on my “Must Build” list for at least a couple of decades. All the gliders that I build have significance to me in that I have either flown or lusted over the full size machine. In the case of the Pilatus B4 I can see from my old and rather tattered log book that I flew it a total of six times back in the late 1970s. My first three flights were winch launches and circuits just to prove to the CFI that I was not going to dent the clubs “Tin Can” as we called it. I then managed three further flights of 32 minutes, 1 hour 5 minutes and 2 hours 25 minutes over the next few months. My memory of the aeroplane was that it was a delight to fly but it rattled a bit.
It is quite a while since I last did a scratch build and on this one I have decided to go “old school”. I couldn’t find a suitable plan to 1:4 scale so I have drawn it myself with good old paper, pencil, scale and straight edge. I am using DevCad for the fuselage formers. I have even constructed the wheel retract unit. However this is not going to be a “Chris Williams” three week build as I have lots of other irons in the fire at the moment but I hope to have it complete sometime this year.
Brian. :)
Attachments
The aircraft that I hope to model.
The aircraft that I hope to model.
General 3-view
General 3-view
images4KITUN7V.jpg (8.79 KiB) Viewed 276 times

User avatar
Peter Balcombe
Posts: 1014
Joined: 18 Mar 2015, 10:13
Location: Clevedon, North Somerset, U.K.

Re: WHO'S BUILDING WHAT FOR 2020...?

Post by Peter Balcombe »

Well done Brian,
I look forward to following the ‘real time’ build.
Peter

Post Reply