Guys I'm trying to set the CG on the Pawnee
Manual says
8½ to 9 inches back, other forums are saying it's more like 10 to 10½¹"
It has a Zenoah 80cc twin up front and is very tail heavy at 10"
I'm trying to CG it the right way up would I be better doing it inverted ?
Apparently the model was only flown once at the manuals measurements, i can't understand whys it's so tail heavy
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
33% Pawnee CG advice
-
- Posts: 38
- Joined: 05 Sep 2017, 13:11
- Location: COLERAINE Northern Ireland
-
- Posts: 335
- Joined: 18 Mar 2015, 08:18
- Location: West Wales
- Contact:
Re: 33% Pawnee CG advice
Andy, are you using a Vanessa rig? It's by far the easiest way to balance big models.
I'd go for 9" and work backwards, remembering the old adage... If you're not sure about the rig DM me and I'll explain.
Cheers, Ell.
I'd go for 9" and work backwards, remembering the old adage... If you're not sure about the rig DM me and I'll explain.
Cheers, Ell.
-
- Posts: 38
- Joined: 05 Sep 2017, 13:11
- Location: COLERAINE Northern Ireland
Re: 33% Pawnee CG advice
Good man Elliott
Thank you
It's been frying my head
Thank you
It's been frying my head
- Stuart Ward
- Posts: 80
- Joined: 21 Mar 2015, 18:23
- Location: Pukekohe NZ
Re: 33% Pawnee CG advice
I made a couple of short videos a couple of years ago. I hope the help with the venessa rig