Don't forget to check your spam folder if you don't get an activation email after joining!!

SLINGSBY GULL 3: 1:3.25 scale

Let us all watch your new project progress.
User avatar
chris williams
Posts: 1164
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: SLINGSBY GULL 3: 1:3.25 scale

Post by chris williams »

Thanks, Vince...all made possible with your help. Thanks go also to Robbie :)

User avatar
chris williams
Posts: 1164
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: SLINGSBY GULL 3: 1:3.25 scale

Post by chris williams »

At last! Finally, a chance to fly the Gull on a hill. Needless to say, despite the windy conditions, the lift died and an emergency landing had to be performed. :roll:
Attachments
IMG_2580 copy.jpg
IMG_2620 copy.jpg
IMG_2632 copy.jpg

User avatar
Martynk
Posts: 110
Joined: 23 Mar 2017, 21:23
Location: Haslington
Contact:

Re: SLINGSBY GULL 3: 1:3.25 scale

Post by Martynk »

Hi Chris

A little late, but what paint do you use? How do you apply it?

Knoll53
Posts: 1
Joined: 02 Jul 2019, 04:54
Location: Marina, CA USA

Re: SLINGSBY GULL 3: 1:3.25 scale

Post by Knoll53 »

Don't feel bad about the non-response inasmuch as a fair response might start with the purchase of Supplied Air Respirator System such as this one.
https://www.eastwood.com/hobby-air-ii-half-mask.html
Word on the street is that 2K paint is highly toxic.

Kent

User avatar
chris williams
Posts: 1164
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: SLINGSBY GULL 3: 1:3.25 scale

Post by chris williams »

Nearing completion, a scaled-down version of the Gull at 1:3.9
Attachments
P1060658.JPG
P1280239.JPG
P1280241.JPG
P1280242.JPG

Post Reply