-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Ikarus Meteor 1/3
-
- Posts: 65
- Joined: 09 Mar 2018, 09:42
- Location: Den Bosch
Re: Ikarus Meteor 1/3
Some more activities on the wing. I have sanded the support blocks in the nose section. That went rather easy as I used soft balsa. Just sand until the black has disappeared from the the ribs.
-
- Posts: 65
- Joined: 09 Mar 2018, 09:42
- Location: Den Bosch
Re: Ikarus Meteor 1/3
Then the sheeting of the nose section. I bought a rather hard quality 2mm balsa so the bending will take quite some force. Too overcome that problem I wetted the top surface a bit. The sheet will start to curve by itself and can be glued with almost no force applied.
-
- Posts: 65
- Joined: 09 Mar 2018, 09:42
- Location: Den Bosch
Re: Ikarus Meteor 1/3
For your information, I have put the Meteor build into a temporary slow down. Summer is coming so time to go out flying! And in addition a small intermediate project...
- Cliff Evans
- Posts: 1035
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Ikarus Meteor 1/3
FLYING!!!!!!!!!!!!!!!!!!!!!!!!
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
-
- Posts: 38
- Joined: 18 May 2018, 06:41
- Location: Yamba
Re: Ikarus Meteor 1/3
Hi again,
Its been a while since I checked in due to such a crazy year. I am moving soon and once re-located I will have a large shed and workshop I can really get building.
Your Ikarus is looking fantastic and hopefully mine will meet the cut as well.
Have a great day
Steve
Its been a while since I checked in due to such a crazy year. I am moving soon and once re-located I will have a large shed and workshop I can really get building.
Your Ikarus is looking fantastic and hopefully mine will meet the cut as well.
Have a great day
Steve
-
- Posts: 65
- Joined: 09 Mar 2018, 09:42
- Location: Den Bosch
Re: Ikarus Meteor 1/3
Hello Steve,
Thanks for your compliments!
Actually already looking forward to continue the construction of my Meteor as the flying season seems to be over!
Thanks for your compliments!
Actually already looking forward to continue the construction of my Meteor as the flying season seems to be over!
- BrianF
- Posts: 111
- Joined: 19 Mar 2018, 09:36
- Location: Brisbane AU
- Contact:
Re: Ikarus Meteor 1/3
We seem to be the three individuals building it at the moment. I was making great headway, but many things have occurred recently, work got very complex, my career has ended courtesy of Covid and I am having major surgery in a week that will slow me down more and keep me from some workshop activities. Hope to get back to it ASAP.
The Meteor assembled near the front.
The Meteor assembled near the front.
Der Himmel ist blau und die Luft ist gut!
www.seqsa.net
www.seqsa.net
-
- Posts: 65
- Joined: 09 Mar 2018, 09:42
- Location: Den Bosch
Re: Ikarus Meteor 1/3
Wish you all the best Brian!!
- Cliff Evans
- Posts: 1035
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Ikarus Meteor 1/3
Some pictures taken from the VGC Facebook page of the Icarus Meteor that may be of interest
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
- Cliff Evans
- Posts: 1035
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Ikarus Meteor 1/3
And a short video of the full size.
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk