• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

Mike Bond Wilga

Be kind to our tug pilots, we cant do without them.
User avatar
Andy.Meade
Posts: 31
Joined: 18 Mar 2015, 09:56

Re: Mike Bond Wilga

Post by Andy.Meade »

Would the SLEC laser cut kit be good to go with a Mike Bond plan from about 6 years ago (bought direct from the man himself)? Just wondering if there was any major changes - the above statement about the magazine released one has unsettled me!
Barry_Cole

Re: Mike Bond Wilga

Post by Barry_Cole »

Elliot Howells wrote: 03 Mar 2021, 20:14 As an aside, here is a cracking build thread from a really tidy Ozzie modeller, makes a beautiful job then puts a big Moki radial in her!

https://www.rcscalebuilder.com/forum/fo ... 1&KW=wilga

Enjoy all 200 plus pages!

Ell.
That link does not seem to work.
User avatar
Andy.Meade
Posts: 31
Joined: 18 Mar 2015, 09:56

Re: Mike Bond Wilga

Post by Andy.Meade »

It works OK for me - might only work if you have an RCSB account though.
Elliot Howells
Posts: 333
Joined: 18 Mar 2015, 08:18
Location: West Wales
Contact:

Re: Mike Bond Wilga

Post by Elliot Howells »

Andy, I think the plan gets incremental changes as and when Mike finds things to improve. But from 6 years ago, you'll be fine.

Ell.
Mike bond
Posts: 3
Joined: 28 Jan 2021, 13:13
Location: Northampton

Re: Mike Bond Wilga

Post by Mike bond »

The overall build of the Wilga has stayed true. The only changes have been minor thing like lightning holes, in formers and wing ribs.
Gordon McLean
Posts: 5
Joined: 21 Jan 2021, 22:46
Location: Easton, Pennsylvania

Re: Mike Bond Wilga

Post by Gordon McLean »

I don't see a kit on SLEC.

Can I still get a kit? Does anyone make gear?
Mike bond
Posts: 3
Joined: 28 Jan 2021, 13:13
Location: Northampton

Re: Mike Bond Wilga

Post by Mike bond »

Hi the kit is purchased through me
User avatar
Andy.Meade
Posts: 31
Joined: 18 Mar 2015, 09:56

Re: Mike Bond Wilga

Post by Andy.Meade »

Hi Mike, I did respond to the email yesterday - let me know if you get it OK please. Cheers!
Gordon McLean
Posts: 5
Joined: 21 Jan 2021, 22:46
Location: Easton, Pennsylvania

Re: Mike Bond Wilga

Post by Gordon McLean »

Hi Mike-

i have been emailing you at your btinternet address.
Can you provide details on a what is available?

Thanks in advance.

Gordon
User avatar
Andy.Meade
Posts: 31
Joined: 18 Mar 2015, 09:56

Re: Mike Bond Wilga

Post by Andy.Meade »

Anyone heard from Mike recently? I'm in a position to start getting parts together for the Wilga build now, could do with a nice kit of parts to save me a lot of time! I've sent emails etc. but no response.
Post Reply