• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

carbon tube wing joiners

General discussion on any topic which doesn't have a natural home on any of the other boards.
barrieburton34
Posts: 20
Joined: 05 Jul 2018, 13:52
Location: warwickshire

carbon tube wing joiners

Post by barrieburton34 »

I am altering an old 3M span flying,the original wing joining method of Groupner box and blade,cannot be used (no blade).I am increasing the sweep back.The only practical access to the structure is by removing part of the wing sheeting.I was hoping to use carbon tubes,one sliding inside the other.I cannot find fitting tubes.The outers are ground,but the inner.Any ideas welcome

Barrie B
User avatar
Cliff Evans
Posts: 1032
Joined: 29 Dec 2019, 15:13
Location: Bristol
Contact:

Re: carbon tube wing joiners

Post by Cliff Evans »

https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
Phill Tadman
Posts: 329
Joined: 18 Aug 2015, 20:38
Location: South Cambs

Re: carbon tube wing joiners

Post by Phill Tadman »

barrieburton34
Posts: 20
Joined: 05 Jul 2018, 13:52
Location: warwickshire

Re: carbon tube wing joiners

Post by barrieburton34 »

Many thanks,both of you

Barrie B
Post Reply