I am altering an old 3M span flying,the original wing joining method of Groupner box and blade,cannot be used (no blade).I am increasing the sweep back.The only practical access to the structure is by removing part of the wing sheeting.I was hoping to use carbon tubes,one sliding inside the other.I cannot find fitting tubes.The outers are ground,but the inner.Any ideas welcome
Barrie B
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
carbon tube wing joiners
-
- Posts: 20
- Joined: 05 Jul 2018, 13:52
- Location: warwickshire
- Cliff Evans
- Posts: 1036
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: carbon tube wing joiners
You could try here: https://www.carbonfibreprofiles.com/
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
-
- Posts: 329
- Joined: 18 Aug 2015, 20:38
- Location: South Cambs
-
- Posts: 20
- Joined: 05 Jul 2018, 13:52
- Location: warwickshire
Re: carbon tube wing joiners
Many thanks,both of you
Barrie B
Barrie B