I’ve now added a NACA shaped vent to the forward canopy after 3D printing an angled shroud and glueing this to the inside as shown below.
The rectangular vent opening is approximately 25mm x 5mm which is more than 3x the cool nose spinner inlet area.
Now just need to tidy up & paint the shroud ramp red.
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Albion 5m Electric soarer
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Albion 5m Electric soarer
Front hatch looks a lot better after the vent has been treated to a coat of red humbrol enamel
-
- Posts: 14
- Joined: 13 Jan 2021, 11:08
- Location: Lyme Regis
Re: Albion 5m Electric soarer
Has your Albion flown yet?
-
- Posts: 1
- Joined: 06 Mar 2022, 10:40
- Location: Maidstone
Re: Albion 5m Electric soarer
I am having a loft clear out and have a 5M Albion fuselage which unused and needs a new home. Complete with both hatch covers.
Richard
Richard
- Cliff Evans
- Posts: 1034
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Albion 5m Electric soarer
Yes John, it has, the only problem I had was the speed controller packed up. Other than that, she flies very nicely.
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
- Cliff Evans
- Posts: 1034
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Albion 5m Electric soarer
Some shorts of take off and landing.
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Albion 5m Electric soarer
Nice ones Cliff