• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

I really, really, want one...!

If you need help on creating or dealing with a plan in dxf or other formats, then this is the place to ask.
User avatar
chris williams
Posts: 1549
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

I really, really, want one...!

Post by chris williams »

Barry_Cole

Re: I really, really, want one...!

Post by Barry_Cole »

What have you done with the real Chris Williams??????????

:? :? :? :?

BC
C.olson

Re: I really, really, want one...!

Post by C.olson »

I want one too :oops:
Tom Pack
Posts: 88
Joined: 18 Mar 2015, 23:33
Location: USA

Re: I really, really, want one...!

Post by Tom Pack »

If you look into them they are quite reasonable priced........ the only downside I see is that you would become very pasty..... what with spending 100% of your time in the shop playing with the thing!
Mike F
Posts: 114
Joined: 18 Mar 2015, 14:08
Location: Gloucestershire

Re: I really, really, want one...!

Post by Mike F »

Tom
How much are they selling for in the USA?

MIke
Mike Seale

Re: I really, really, want one...!

Post by Mike Seale »

Here's a link showing where you can buy these machines. There is a US dealer

https://www.stepcraft-systems.com/en/retail

Mike

BTW, when you look into it you would need to purchase some more powerful software to get the most from the setup. This will add about £200 or more to the basic system. It still ends up being a reasonably priced system...very tempting
Mike F
Posts: 114
Joined: 18 Mar 2015, 14:08
Location: Gloucestershire

Re: I really, really, want one...!

Post by Mike F »

I see that they have a sales outlet here in Singapore....same building where the larger RC model shops are located....will take a look next week end.
Martin G
Posts: 82
Joined: 18 Mar 2015, 13:27
Location: North Wiltshire

Re: I really, really, want one...!

Post by Martin G »

Stepcraft cnc machines are also sold in the UK.

http://stoneycnc.co.uk/

Martin.
Post Reply