Old Gliders SZD-22 Mucha 1/4 Scale
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Re: Old Gliders SZD-22 Mucha 1/4 Scale**
-
- Posts: 15
- Joined: 23 Nov 2021, 17:24
- Location: Pittstown
Re: Old Gliders SZD-22 Mucha 1/4 Scale**
I just finished up a 1/4 scale SZD-22. First flights on 10/31 and then some aerotow action at the 57th Cumberland Soar for Fun.
My build log is on the scalesoaring.com site.
https://forum.scalesoaring.com/forum/ae ... -mucha-1-4
My build log is on the scalesoaring.com site.
https://forum.scalesoaring.com/forum/ae ... -mucha-1-4
-
- Posts: 15
- Joined: 23 Nov 2021, 17:24
- Location: Pittstown
Re: Old Gliders SZD-22 Mucha 1/4 Scale**
My local library has a nice Makerspace setup now. Cricut for vinyl, 70W laser cutter, some 3d printers, direct to garment printing, etc.
I had some success cutting some trim pieces out of Oratex on the Cricut. It's just limited to 12 x 24 size for the tacky cutting mat that I place the Oratex on face down. Then cut with the rotary cutter. It is useful for big pieces. But it's not an alternative for more detailed vinyl stuff.
I had some success cutting some trim pieces out of Oratex on the Cricut. It's just limited to 12 x 24 size for the tacky cutting mat that I place the Oratex on face down. Then cut with the rotary cutter. It is useful for big pieces. But it's not an alternative for more detailed vinyl stuff.