-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
M100S
- RobbieB
- Posts: 547
- Joined: 07 Mar 2015, 22:22
- Location: North West
Re: M100S
As I am about to re-start my M100S build (a small problem stopped play somewhat earlier in the year) I thought I would briefly recap on the build that was started on the old forum but was, unfortunately, one of those that disappeared into the ether.
So, the basic structure in the jig:
Cable runs and guids down the fuz:
Battery compartment:
Release servo:
Front 1.5mm planking and skid mounts:
Tailplane mounting bracket and spar locator plate:
More to follow.
Apologies to those who have seen them before but I did promise to salvage as much of the thread as I could.
So, the basic structure in the jig:
Cable runs and guids down the fuz:
Battery compartment:
Release servo:
Front 1.5mm planking and skid mounts:
Tailplane mounting bracket and spar locator plate:
More to follow.
Apologies to those who have seen them before but I did promise to salvage as much of the thread as I could.