Page 1 of 1
Re: Anyone using a FrSky Horus on FrTx OS (not Open TX)?
Posted: 20 Sep 2017, 16:24
by Barry_Cole
I am working on this with Roberto.
BC
Re: Anyone using a FrSky Horus on FrTx OS (not Open TX)?
Posted: 20 Sep 2017, 20:40
by Barry_Cole
Roberto Alonso wrote: ↑20 Sep 2017, 19:35
Now, if I could get a logical switch to actually lower the landing gear if under 20m high instead of simply reminding me via a voice warning…
Roberto,
Another reason to change to OTX, and to have the landing gear go up and down automatically is simple....
Go for it.
BC
Re: Anyone using a FrSky Horus on FrTx OS (not Open T
Posted: 20 Sep 2017, 21:12
by Peter Balcombe
Roberto,
How about trying to set a logical switch when the altitude is <20m & then use that in a special function to override your retract channel to set gear down.
If you want to enable this action with a manual switch then use this in the logical switch.
You can always use further special functions to announce when the gear goes down or retracts.
Altimeter logical switch should be something like:
L1 a<x Alt 20 retract enable switch, minimum duration (to stop glitching when height close to 20m)
Special function would be something like:
SF1 L1 Override CH5 Retract channel value for gear down 1X (for single event)
Not sure if this works in standard OS but may be worth a try.