-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
1/2 Scale PWS-101
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
1/2 Scale PWS-101
Not long anymore and a 1/2 Scale PWS-101 kit will be available through Cliff Evans.
Attached a rendered picture of the computer model. Estimated availability of drawings and kit is end of March
Wings span 9.5 meter flying weight estimated at 28-30 kg.
Attached a rendered picture of the computer model. Estimated availability of drawings and kit is end of March
Wings span 9.5 meter flying weight estimated at 28-30 kg.
- VinceC
- Site Admin
- Posts: 613
- Joined: 22 Feb 2015, 11:45
- Contact:
Re: 1/2 Scale PWS-101
Thanks for your continuous support for modellers.
-
- Posts: 106
- Joined: 11 Mar 2015, 12:06
Re: 1/2 Scale PWS-101
Looks great thanks for the hard work
-
- Posts: 88
- Joined: 18 Mar 2015, 23:33
- Location: USA
Re: 1/2 Scale PWS-101
Did one of these ever get built?
- Cliff Evans
- Posts: 1035
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: 1/2 Scale PWS-101
I think one was built in New Zealand! May be wrong. I am sure Jilles will know. Have the plans etc if you want to have a go!
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: 1/2 Scale PWS-101
The Guy in New Zealand had two sets cut some time ago. since then silence. Will make some inquiries.
-
- Posts: 88
- Joined: 18 Mar 2015, 23:33
- Location: USA
Re: 1/2 Scale PWS-101
I would love to.......just a matter of time! I’m backed up quite a bit in the model building section of life.....the other “less important” things like work and sleep keep getting in the way!Cliff Evans wrote: ↑13 Aug 2020, 08:05 I think one was built in New Zealand! May be wrong. I am sure Jilles will know. Have the plans etc if you want to have a go!
Screenshot 2020-08-13 08.07.34.png
-
- Posts: 219
- Joined: 22 Mar 2015, 10:27
- Location: Australia
- Contact:
Re: 1/2 Scale PWS-101
Got hold of the names of the Guys in New Zealand that both had the parts cut locally.
the health of one guy turned bad and I under stand he is in and out of hospital.The other was busy building a new house and shed. That is now completed, The new shed is large enough to build the 1/2 scale PWS so there is hope one will finally be built
the health of one guy turned bad and I under stand he is in and out of hospital.The other was busy building a new house and shed. That is now completed, The new shed is large enough to build the 1/2 scale PWS so there is hope one will finally be built
-
- Posts: 88
- Joined: 18 Mar 2015, 23:33
- Location: USA
Re: 1/2 Scale PWS-101
Sounds great! Have you all found a new laser cutter here in the USA yet??? Really want to take one of these on....Jilles wrote: ↑16 Aug 2020, 01:32 Got hold of the names of the Guys in New Zealand that both had the parts cut locally.
the health of one guy turned bad and I under stand he is in and out of hospital.The other was busy building a new house and shed. That is now completed, The new shed is large enough to build the 1/2 scale PWS so there is hope one will finally be built
- Cliff Evans
- Posts: 1035
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: 1/2 Scale PWS-101
Hi Tom, No I have not found anyone yet, I am sending kits across at the moment but postage is horrendous! A 1/3 scale kit on average costs £70+ to post! some of that cost is insurance but still B****y expensive. I dread to think what the cost of the half-scale would be.
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk