Page 1 of 9
HW-4 FLAMINGO 1/4 SCALE
Posted: 30 Sep 2019, 12:47
by chris williams
I can't quite work out if this is a scaled-down version of my large one, or a scaled-up version of the small one, but either way, the new Flamingo should still be OAP-friendly...
Fuselage construction is the well proven half-shell method. Much quicker and easier than a jig, but care needs to be taken to keep the fuselage straight...
Re: HW-4 FLAMINGO 1/4 SCALE
Posted: 01 Oct 2019, 12:33
by chris williams
Directly related to this project, Motley's Petrel has undergone the same scaling-up process and is proceeding at a great pace...
Re: HW-4 FLAMINGO 1/4 SCALE
Posted: 02 Oct 2019, 09:10
by chris williams
The longerons are 5mm sq spruce, my new favourite size. They're shaped at the front with the latest in hi-tec steaming methods. 1.5mm ply planking is applied at the front end. The slots for the little ply transfer plates are cut with the power file......
Re: HW-4 FLAMINGO 1/4 SCALE
Posted: 03 Oct 2019, 10:14
by chris williams
Once enough of the planking has been applied, and the diagonals added, the half-shell is stiff enough to remove from the board...
Re: HW-4 FLAMINGO 1/4 SCALE
Posted: 03 Oct 2019, 17:36
by geoff_crew
He probably has Cliff but without hardener the paint takes a long time to dry, so a little patience please
Geoff
Re: HW-4 FLAMINGO 1/4 SCALE
Posted: 04 Oct 2019, 22:28
by chris williams
It is but the work of a moment or two to install the opposite side...
Re: HW-4 FLAMINGO 1/4 SCALE
Posted: 07 Oct 2019, 16:08
by chris williams
The planking & bracing continues...
Re: HW-4 FLAMINGO 1/4 SCALE
Posted: 09 Oct 2019, 10:11
by chris williams
Time to add the front part of the top decking, and to make a start on the nose cone...
Re: HW-4 FLAMINGO 1/4 SCALE
Posted: 10 Oct 2019, 14:52
by chris williams
The anatomy of a nose cone... It takes around five applications of filler to get the job done...
Re: HW-4 FLAMINGO 1/4 SCALE
Posted: 12 Oct 2019, 10:12
by chris williams
With the temporary liteply formers removed, the interior of the fuselage can now be glassed with glass cloth and polyester resin