-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Pat teakle salto fuselage
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Pat teakle salto fuselage
A bit of a long shot but has anyone got a pat teakle fuselage that they do not want. The salto fuselages are not available anymore.
- Cliff Evans
- Posts: 1036
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Pat teakle salto fuselage
If you find one Roo, call me i will get a mold made from it and I will make sure you still have one.
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: Pat teakle salto fuselage
Thanks cliff if I can not find one I may build a salto fuselage would only take me a couple of weeks and cost me £20. May build it to 4.2 span.
- Cliff Evans
- Posts: 1036
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Pat teakle salto fuselage
Found a Fuss, Thanks Steve.
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
- terry white
- Posts: 508
- Joined: 18 Mar 2015, 21:08
- Location: wareham,dorset.england
Re: Pat teakle salto fuselage
Hi guys,did you know that Pat also did a 1/5 scale Salto.I bought three from him in my time, lots of fun,I will try and find a few photos for you.
A word of warning. The wing section on the 1/4 scale was not the best for this model. Pat himself would agree that if asked. Discussing this with him (a long,long time ago) he told me that he had thought of a change to the section. However as the section was already part of the fus mold it would take a lot of work to alter,and at that time the sales of the Salto didn't warrant such an input of work. Perhaps now with the resurgence of the Salto it would be a good time to make the revamp. I think that with a good wing and a strong epoxy fus it would sell really well. Just a thought.
A word of warning. The wing section on the 1/4 scale was not the best for this model. Pat himself would agree that if asked. Discussing this with him (a long,long time ago) he told me that he had thought of a change to the section. However as the section was already part of the fus mold it would take a lot of work to alter,and at that time the sales of the Salto didn't warrant such an input of work. Perhaps now with the resurgence of the Salto it would be a good time to make the revamp. I think that with a good wing and a strong epoxy fus it would sell really well. Just a thought.
- Cliff Evans
- Posts: 1036
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Pat teakle salto fuselage
Will look at the wing section but stick with the polyester fuss! any suggestions for the wing section anyone?
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
- Peter Balcombe
- Posts: 1399
- Joined: 18 Mar 2015, 10:13
- Location: Clevedon, North Somerset, U.K.
Re: Pat teakle salto fuselage
Just spoken to Pat Teakle who says that the original Salto wing used a Ritz1 section.
He thought that the Ritz3 (as used on the PIK20 & Vega) would go better.
He still remembers the 1/5 scale version Terry
He thought that the Ritz3 (as used on the PIK20 & Vega) would go better.
He still remembers the 1/5 scale version Terry
-
- Posts: 5
- Joined: 09 Dec 2018, 10:47
- Location: Oldham
Re: Pat teakle salto fuselage
I’ve got a 1/5 scale Salto, hoping it goes all right,
- Cliff Evans
- Posts: 1036
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
Re: Pat teakle salto fuselage
New mould is being made as I type!
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
https://patteaklegliders.co.uk
- mjcp
- Posts: 183
- Joined: 29 Jul 2015, 08:14
- Location: A wind swept hill with no wind, in driving distance of Windsor, UK
- Contact:
Re: Pat teakle salto fuselage
4.2m ? *excited*
M
M
m̶j̶c̶p̶ Marc
Hanger -
Some (now) pristine models that are un-flown for a year.
Hanger -
Some (now) pristine models that are un-flown for a year.