• Administrator
  •  
    Before your membership becomes valid, you will receive an email that must be answered.
    Please check your spam folder or this email.
     

ZUGVOGEL IIIa 1/4.2 SCALE

Let us all watch your new project progress.
User avatar
chris williams
Posts: 1549
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by chris williams »

With the rudder made up and hinged to the fin, the whole assembly can be glued to the fuselage, thus completing this part of the process...
Attachments
P1060444 - Copy.JPG
P1060445 - Copy.JPG
P1060446 - Copy.JPG
P1060447 - Copy.JPG
P1060449 - Copy.JPG
Barry_Cole

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by Barry_Cole »

Try not to knock it off this time....

8-) :D 8-) :D

BC
geoff_crew
Posts: 93
Joined: 18 Mar 2015, 06:18
Location: Blandford Forum

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by geoff_crew »

Yeah, that'll be known as criminal activity ;)

Geoff
aka Motley
Barry_Cole

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by Barry_Cole »

Next he will be telling us he has run out of servos. Who would do that??

8-) :lol: 8-) :lol:

BC
User avatar
chris williams
Posts: 1549
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by chris williams »

Just had a visit from the Servo Fairy... ;)
Barry_Cole

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by Barry_Cole »

I know he's a bit short, but that's going a bit far....

:roll: :roll: :roll: :roll:

BC
geoff_crew
Posts: 93
Joined: 18 Mar 2015, 06:18
Location: Blandford Forum

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by geoff_crew »

Mmmm, obviously going to have to change those shorts :oops: Still, on another note, i wonder if i'll find a couple of quid under my pillow tomorrow morning ???? :)

Geoff
aka Motley
User avatar
chris williams
Posts: 1549
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by chris williams »

Moving on now to the wings...pretty conventional stuff: single 15mm wing joiner, and the aileron spar is located by the ends of the sub-ribs...
The ribs are 2.4mm balsa and the main spar 5mm sq spruce.
Attachments
P1060452.JPG
P1060453.JPG
P1060454.JPG
P1060455.JPG
User avatar
chris williams
Posts: 1549
Joined: 10 Mar 2015, 10:50
Location: Blandford Dorset

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by chris williams »

That's better, well done Cliff...Time for a dihedral check before committing epoxy...
Attachments
P1060456.JPG
User avatar
Cliff Evans
Posts: 1032
Joined: 29 Dec 2019, 15:13
Location: Bristol
Contact:

Re: ZUGVOGEL IIIa 1/4.2 SCALE

Post by Cliff Evans »

You are welcome!
https://lasercutsailplanes.co.uk
https://patteaklegliders.co.uk
Post Reply