Page 3 of 7
Re: MINIMOA MO2a 3.5 SCALE
Posted: 01 Feb 2021, 09:54
by chris williams
With the skid glued on and the MPX tow release temporarily installed, attention can now move towards fitting the wings to the fuselage...
Note that the rubber retention bands sit closer together than usual, in order to hide their existence inside the joiner box assembly in the fuselage.
Re: MINIMOA MO2a 3.5 SCALE
Posted: 01 Feb 2021, 12:00
by Keith
Lookin good Chris, could you please tell me where you get you servo cable from on the roll? Thanks
Keith
Re: MINIMOA MO2a 3.5 SCALE
Posted: 01 Feb 2021, 12:48
by chris williams
I'm pretty sure I got it from Overlander...
Re: MINIMOA MO2a 3.5 SCALE
Posted: 01 Feb 2021, 12:57
by Peter Balcombe
Keith,
An alternative source is the Component Shop for cable & conectors.
https://www.componentshop.co.uk/cable/servo-wire.html
Re: MINIMOA MO2a 3.5 SCALE
Posted: 01 Feb 2021, 23:49
by Barry_Cole
Re: MINIMOA MO2a 3.5 SCALE
Posted: 02 Feb 2021, 09:53
by chris williams
The wing root fairings are finalised the usual way with filler...
Re: MINIMOA MO2a 3.5 SCALE
Posted: 03 Feb 2021, 11:37
by chris williams
Back to the wings now and it's the flaps & spoilers...
Re: MINIMOA MO2a 3.5 SCALE
Posted: 04 Feb 2021, 10:05
by chris williams
Now for the tricky bit: the canopies...
Re: MINIMOA MO2a 3.5 SCALE
Posted: 04 Feb 2021, 12:45
by Barry_Cole
Re: MINIMOA MO2a 3.5 SCALE
Posted: 04 Feb 2021, 12:50
by Peter Balcombe
It’s to give him more time to do the tricky bits Barry