-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Ls8 neo
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Ls8 neo
I was not planning on building anything for a while. But decided I would like a smaller glider with electric motor so I can fly it any where glider . So I started a ls8 neo the full size is front electric system so will be scale. Was looking at the multiplex gliders but did not want to pay that for a foam glider even if they are good. When I can build a glass and foam veneer one for less. Span will be around 3.2 to 3.3
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
-
- Posts: 45
- Joined: 26 Dec 2020, 19:02
- Location: Cambridgeshire
Re: Ls8 neo
Good luck Roo. I'll be watching this build.
- Max Wright
- Posts: 198
- Joined: 10 Mar 2020, 19:57
- Location: Clayton Bay South Australia
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: Ls8 neo
All the foam parts made but the fuselage snapped doing the hole for the wings. Glued all together again. Finshed with polyfilier. Ready for sanding.
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: Ls8 neo
Some of the fuselage glassed but have not anymore glass. Easy compersits have no 200gm glass and glass balloons in stock so it is on hold tI'll it's in stock
- mjcp
- Posts: 183
- Joined: 29 Jul 2015, 08:14
- Location: A wind swept hill with no wind, in driving distance of Windsor, UK
- Contact:
Re: Ls8 neo
m̶j̶c̶p̶ Marc
Hanger -
Some (now) pristine models that are un-flown for a year.
Hanger -
Some (now) pristine models that are un-flown for a year.
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
Re: Ls8 neo
Thanks Marc. But I have finished with scrap bits of glass and a strip of carbon.
-
- Posts: 557
- Joined: 18 Mar 2015, 20:12
- Location: Northamptonshire
- terry white
- Posts: 508
- Joined: 18 Mar 2015, 21:08
- Location: wareham,dorset.england
Re: Ls8 neo
Hi Roo, hope you and the Mrs. are well.
I'm interested to see how you are going to run the servo power and mechanics to the tail plane
and attach the fin to the fus strong enough to withstand landing loads etc.
I'm interested to see how you are going to run the servo power and mechanics to the tail plane
and attach the fin to the fus strong enough to withstand landing loads etc.