v-tail servo's symmetrical position
-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
Cliff Charlesworth Ka3 from LCS**
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
v-tail servo's installed in removable tray
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
Hi Chris,
thank you for your comment, I'll give the 600-800 paper a try
when painting the wings
thank you for your comment, I'll give the 600-800 paper a try
when painting the wings
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
time for an update on the V-tail
2mm wire bent at correct angle
2mm wire bent at correct angle
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
2mm wire soldered onto copper plate wire let into the wood, wire and copper plate epoxied to wood
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
back view
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
v-tail main spar
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
hinges reinforced with 0.4 mm ply
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
2 mm bent wire left and right
-
- Posts: 129
- Joined: 18 May 2021, 18:36
- Location: Lyon France
Re: Cliff Charlesworth Ka3 from LCS
half-rounds, top ones covered in 0.4 mm ply (facing hinges)