-
- Administrator
-
-
Before your membership becomes valid, you will receive an email that must be answered.
Please check your spam folder or this email.
CM 8/13
-
- Posts: 48
- Joined: 18 Mar 2015, 21:11
- Location: Strasbourg ( FRANCE )
- Contact:
CM 8/13
I have started my new acrobatic glider last April, hopping it will be finished in next May for the annual GPR meeting in Menez Hom. Huge challenge when, you are still in activity and normanlly I make 2 years for building one
The real one is stored at Anger Macé Museum and mine will be at 1/3 scale with 4.5 meter of wingspan
Pat'
The real one is stored at Anger Macé Museum and mine will be at 1/3 scale with 4.5 meter of wingspan
Pat'
-
- Posts: 48
- Joined: 18 Mar 2015, 21:11
- Location: Strasbourg ( FRANCE )
- Contact:
-
- Posts: 48
- Joined: 18 Mar 2015, 21:11
- Location: Strasbourg ( FRANCE )
- Contact:
Re: CM 8/13
Frames are now on the primitive jig and stringers are on going for glueing ( pin 8 x 8 ).
- chris williams
- Posts: 1574
- Joined: 10 Mar 2015, 10:50
- Location: Blandford Dorset
Re: CM 8/13
Nice looking glider, Pat, not seen that one before...
- Cliff Evans
- Posts: 1036
- Joined: 29 Dec 2019, 15:13
- Location: Bristol
- Contact:
-
- Posts: 48
- Joined: 18 Mar 2015, 21:11
- Location: Strasbourg ( FRANCE )
- Contact:
-
- Posts: 48
- Joined: 18 Mar 2015, 21:11
- Location: Strasbourg ( FRANCE )
- Contact:
-
- Posts: 48
- Joined: 18 Mar 2015, 21:11
- Location: Strasbourg ( FRANCE )
- Contact:
Re: CM 8/13
The fuse is enough strong to be remove from the jig and move on to lower side
Pat'
Pat'
-
- Posts: 497
- Joined: 18 Mar 2015, 07:52
- Contact:
Re: CM 8/13
Pattepatte de loup wrote: ↑02 Jan 2022, 17:28 Now, is time for planking with 30/10 balsa sheet of the upper side .
Can you explain what 30/10 balsa is please?
AEB
AEB = Aeronautical Energiser Bunny (with thanks to CW)
-
- Posts: 48
- Joined: 18 Mar 2015, 21:11
- Location: Strasbourg ( FRANCE )
- Contact:
Re: CM 8/13
John,john greenfield wrote: ↑11 Jan 2022, 09:34Pattepatte de loup wrote: ↑02 Jan 2022, 17:28 Now, is time for planking with 30/10 balsa sheet of the upper side .
Can you explain what 30/10 balsa is please?
AEB
I cut strips of 10 mm width from balsa sheet of 3mm thick for planking the fuse. Same method for making a hull of boat.
( sorry my english is little poor )